| Frequency coverage: | Amateur bands (1.8 – 29.7) MHz including WARC + 50 MHz |
| Power output: | 1700 W in SSB/CW on HF bands, 1300 W on RTTY, 1000 W FT8
1500 W in CW/SSB on 50 MHz, 800 W in FT8/FT4 on 50 MHz |
| Input power: | 40 to 60 W for full output power |
| Input impedance: | 50 ohm, VSWR < 1.5 : 1 |
| Power Gain: | 15 dB |
| Output impedance: | 50 ohm unbalanced |
| Maximum output SWR: | 2:1 |
| SWR protection: | Automatic switching to STBY when reflected power is 250 W or higher |
| Intermodulation distortion: | -32 dB below nominal output |
| Suppression of harmonics: | < -50 dBc on HF, < -70 dBc on 50 MHz |
| Tube: | 4CX1500B ceramic tetrode |
| Cooling: | Centrifugal blower + axial blower (external) |
| Power supply: | Switchable 220/230/240 V - 50/60 Hz |
| Transformers: | 1x toroidal transformer 3 kVA |
| Current max.: | 20 A (recommended minimal IE 20 A circuit breaker) |
| Protection circuits: | - SWR too high |
| | - Anode current too high |
| | - Screen current too high |
| | - Grid current too high |
| | - Mistuning of power amplifier |
| | - Temperature to high |
| | - Soft start for fuse protection |
| | - "switch–on blocking" at opened amplifier |
| Indications: | - 4.3" color touch screen display |
| Features: | - High level of protections |
| | - Memory for faults and warning, easy maintenance |
| | - Automatic set-up anode current (BIAS) – no need to adjust manually after changing the tube |
| | - Many operational parameters on display |
| | - Full QSK with silent vacuum relay |
| | - Easy transport due to detachable HV transformer |
| Mechanical parameters: | 390 mm x 195 mm x 370 mm / 15.35" x 7.67" x 14.56" (width x height x depth) |
| Weight: | 24 kg (53 lb) |
Non disp.
